Tubing Connectors and Fittings
Chemglass Life Sciences Lower Joint Adapter - 45/50 Lower Joint Adapter fits 10, 19 and 25.4mm Stir Shafts, 2-3/8in
Lower Joint Adapter - 45/50 Lower Joint Adapter fits 10, 19 and 25.4mm Stir Shafts, 2-3/8in. Our NEW mechanical seal bearing is the only design on the market that will permit you to use your current glass, metal or PTFE covered stir shaft. The design allows you to have the flexibility of vertical adjustment and still choose your agitator diameter and style. Bearing has a ferrule and locking nut to ensure that the seal rotates properly, and is supplied complete with a gold plated wrench. Lower joint adapters are supplied complete with perfluorinated o-rings and a loosening nut. PLEASE NOTE: BEARING BODY AND LOWER JOINT ADAPTER MUST BE ORDERED SEPARATELY.**MAX RPM WILL DEPEND ON SHAFT AND/OR AGITATOR TYPE, ALONG WITH ALIGNMENT OF MOTOR AND COUPLING. CHEMGLASS RECOMMENDS A MAX OF 500 RPM WHEN USED WITH ANY GLASS VESSEL, LID OR SHAFT. LONGER LENGTH STIRRER SHAFTS ARE REQUIRED FOR USE WITH CG-2077-M MECHANICAL SEAL STIR BEARINGS.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Straight, Male Luer Lock to Hose Barb Adapter, 3/32"" ID; 25/PK
Hose barbs are available from 1/16" to 1/4" with either male or female luer connections. Male luer connections are available with either integral lock ring or separate lock ring.
Chemglass Life Sciences Septum Stopper, Sleeve Type, for 5mm OD NMR Tubes, White
Septum Stopper, Sleeve Type, for 5mm OD NMR Tubes, White. Sleeve type stoppers with a hollow plugs and sleeve extensions that folds down over the neck of a vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, re-sealing after the needle is withdrawn.
Chemglass Life Sciences Tube, Connecting, "T" Shaped, CG-300-02 (10mm Small Serration, 11mm Large Serration) Hose Connection
Tube, Connecting, "T" Shaped, CG-300-02 (10mm Small Serration, 11mm Large Serration) Hose Connection. T shaped tube having serrated ends for connection of rubber, latex or Tygon tubing.
Chemglass Life Sciences Sleeve, PTFE, Medium Length, 24/25 Joint Size
Sleeve, PTFE, Medium Length, 24/25 Joint Size. Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.
Chemglass Life Sciences Sleeve, PTFE, Full Length, 71/60 Joint Size
Sleeve, PTFE, Medium Length, 71/60 Joint Size. Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.
Chemglass Life Sciences Sleeve, PTFE, Full Length, 29/42 Joint Size
Sleeve, PTFE, Medium Length, 29/42 Joint Size. Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.
Chemglass Life Sciences Outer Luer Joint, 8mm OD x 5.0mm ID Capillary
Outer Luer Joint, 8mm OD x 5.0mm ID Capillary. Outer joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1. Available tooled on three tubing sizes.
Chemglass Life Sciences Sleeve, PTFE, Full Length, 34/45 Joint Size
Sleeve, PTFE, Medium Length, 34/45 Joint Size. Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.
Chemglass Life Sciences 12/2 Ball Joint, Clamp Size: 12, Tubing OD: 7.5mm
Made to ASTM Specifications E677. See CG-145-B and CG-150 for clamps. 12/2 Ball Joint, Clamp Size: 12, Tubing OD: 7.5mm.
Chemglass Life Sciences Outer Luer Joint, 6.5mm OD x 1.0mm ID Capillary
Outer Luer Joint, 6.5mm OD x 1.0mm ID Capillary. Outer joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1. Available tooled on three tubing sizes.
Chemglass Life Sciences Outer Luer Joint, 7.5mm OD x 2.0mm ID Capillary
Outer Luer Joint, 7.5mm OD x 2.0mm ID Capillary. Outer joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1. Available tooled on three tubing sizes.
Chemglass Life Sciences 18/9 Ball Joint, Clamp Size: 18, Tubing OD: 12.50-12.90mm
18/9 Ball Joint, Clamp Size: 18, Tubing OD: 12.50-12.90mm. Made to ASTM Specifications E677. See CG-145-B and CG-150 for clamps.
Chemglass Life Sciences Sleeve, PTFE, Medium Length, 29/26 Joint Size
Sleeve, PTFE, Medium Length, 29/26 Joint Size. Reusable .005in thick PTFE sleeve for standard taper joints provides a grease-free seal.
Chemglass Life Sciences 50/30 Ball Joint, Clamp Size: 50, Tubing OD: 36mm
50/30 Ball Joint, Clamp Size: 50, Tubing OD: 36mm. Made to ASTM Specifications E677. See CG-145-B and CG-150 for clamps.